TechniSat Digitradio 510

32
2. Turn SELECT/TUNE knob and then press it to select Normal, Flat, Jazz, Rock, Movie,
Classic, Pop, News, My EQ or My EQ profile setup.
3. To set up My EQ, select 'My EQ profile setup ', and then press SELECT/TUNE knob to
confirm. Turn SELECT/TUNE knob to select Bass or Treble, and then press SELECT/TUNE
knob to confirm. Turn SELECT/TUNE knob to change the value of Bass or Treble, and then
press SELECT/TUNE knob to confirm. Press BACK button, display will show ‘Save changes’.
Turn and press SELECT/TUNE knob to select ‘YES’ to save changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button > Main menu > System settings > Network, press SELECT/TUNE
knob to confirm.
2. Turn SELECT/TUNE knob to select your preferred network setting option:
Network wizard:
Scan for available networks
PBC Wlan Setup:
Set up a WPS encrypted network (only supporting the
router uses WPS 2.0)
View settings.:
View network settings such as MAC address, Wlan
region, IP address etc.
Manual settings:
Set wireless connection
NetRemote PIN Setup:
Set a Net Remote Pin code
Network profile:
List of registered networks or delete some of unwanted
networks
Keep network connected:
Keep network connected in DAB, FM, Bluetooth, Aux in
and standby modes
3. Press SELECT/TUNE knob to confirm your setting.
Setting Time/Date
1. Press MENU button > Main menu > System settings > Time/Date, press SELECT/TUNE
knob to confirm.
2. Turn SELECT/TUNE knob to select options, and then press SELECT/TUNE knob to confirm
the setting.
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from DAB, ‘Update from FM’, ‘Update from
Network’ or ‘No update’
Set format:
12 or 24 hour format
Set timezone:
Select a timezone
(Only available when auto update from Network.)
Daylight saving:
Daylight saving settings
(Only available when auto update from Network.)
3. Then setting time according to your personal preference.