TechniSat DIGITRADIO CD 2GO User Manual

70
5.1.6 Manual station scan
> Briefly press the MENU buon, use the UP or DOWN buons to
select the [Set manually] item and press the OK buon.
> Use the UP or DOWN and OK buons to select a channel (5A to
13F). The signal intensity will now be shown on the display. If a
DAB+ station is being received on a channel, the station ensemble
name is displayed. The antenna can now be aligned to the
maximum signal intensity.
Stations with a signal intensity below the required minimum
signal intensity are not transmiing a strong enough signal.
5.1.7 Volume adjustment (DRC)
The Volume Adjustment menu item is used to set the compression rate,
which compensates for dynamic fluctuations and the associated volume
variations.
> Hold down the MENU buon and use the UP or DOWN buons to
select the [Volume Adjustment] item.
> Press the OK buon.
> Select the compression rate using UP or DOWN:
high - High compression
low - Low compression
o - Compression switched o.
> Confirm by pressing the OK buon.

TechniSat DIGITRADIO CD 2GO Specifications

General

Brand	TechniSat
Model	DIGITRADIO CD 2GO
Category	CD Player
Language	English