EasyManuals Logo

TechniSat DIGITRADIO CD 2GO User Manual

TechniSat DIGITRADIO CD 2GO
Go to English
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
82
Clean the housing using a so, damp cloth. Do not use spirit,
thinners, etc.; you could damage the surface of the device.
Only clean the display with a so, coon cloth. If required, use a
coon cloth with small amounts of non-alkaline, diluted, water-
based or alcohol-based soap solution.
Gently clean the surface using the coon cloth.
10 Troubleshooting
If the device does not operate as intended, check the following table for
information.
Symptom Possible cause/remedy
The device cannot
be switched on.
The device is not being supplied with power.
Connect the mains supply correctly, or insert
new baeries.
No sound can be
heard.
Increase the volume.
The display does
not switch on.
Disconnect the device from the power supply
and then reconnect it.
Poor reception via
DAB+/FM.
Change the location if necessary.
The device cannot
be operated.
Disconnect the device from the power supply
and then reconnect it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DIGITRADIO CD 2GO and is the answer not in the manual?

TechniSat DIGITRADIO CD 2GO Specifications

General IconGeneral
BrandTechniSat
ModelDIGITRADIO CD 2GO
CategoryCD Player
LanguageEnglish