80
8.1 Language
> Press the MENU buon and use the UP or DOWN buons to
select the [System] item, then press the OK buon.
> Use the UP or DOWN buons to select the [Language] item and
press OK.
> Using the UP or DOWN buons, select one of the available
languages and confirm by pressing the OK buon.
8.2 Factory seings
If you change the location of the device, e.g. when moving house, it is
possible that the saved stations can no longer be received. In this case
you can reset the device to factory seings to delete all the saved
stations and launch a new scan.
> Press the MENU buon and use the UP or DOWN buons to
select the [System] item, then press the OK buon.
> Use the UP or DOWN buons to select the [Factory Seings]
item and press OK.
> Using the UP or DOWN buons, select the [Yes] item to reset to
the factory seing and press the OK buon.
All previously stored stations and seings will now be deleted. The
device is now in the same status as when delivered.