TechniSat Technipolar 1 User Manual

40
6 Operation
The control panel is located on the top of the unit.
However, you need to use the remote control in order to utilise the full potential of
the unit.
6.1 Control panel
1 2 3 4 5 6
7 8 9 10 11 12 13 14 15 16
1 Switching operating modes
2 Timer
3 Temperature selection (warmer)
4 Temperature selection (cooler)
5 Fan level
6 On/O switch
7 Heating function on
8 Cooling function on
9 Dehumidifier on
10 Fan on
11 Timer on
12 Display
13 Fan level high
14 Fan level medium
15 Fan level low
16 Automatic temperature regulator on
6.2 Switch On/O
Insert the plug into the wall outlet. "- -" appears on the display.
Press the POWER buon (6) once to switch on the unit.
Press the POWER buon again to switch the unit o.
Never turn o the air conditioner by pulling out the power plug. Always
switch the air conditioner o by pressing the POWER buon and waiting a
few minutes before pulling the plug. This allows the unit to perform a check
cycle and shutdown properly.

TechniSat Technipolar 1 Specifications

General

Brand	TechniSat
Model	Technipolar 1
Category	Air Conditioner
Language	English