EasyManuals Logo

TechniSat TECHNISTAR K4 ISIO User Manual

TechniSat TECHNISTAR K4 ISIO
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
3 Important notice
Dear customer,
This quick start manual describes the most important connection options and basic operation steps to enable
you to quickly start using the TechniStar K4 ISIO.
You will find a detailed operating manual on the enclosed CD-ROM.
If you are unable to read this detailed operating manual, you can request a printed version of the operating
manual from TechniSat free of charge.
There are many additional functions described in the full operating manual that are not covered in this quick
start manual. There is also a great deal of additional information about individual functions and settings
in the full operating manual, which provides a more detailed explanation of the available options and the
purpose of the settings and functions.
4 Remote control
4.1 Changing the battery
> Open the cover on the battery compartment to the rear of the remote control by pushing it in the
direction of the arrow and then lifting it off.
> Insert the supplied batteries, ensuring that the poles are the right way around (indicator visible in
battery compartment).
> Close the battery compartment again.
4.2 Remote control code
By changing the remote control option, it is possible to use this remote control to operate a TechniSat
television and two TechniSat receivers using the same coding.
> Hold down the remote control code button to change the remote control option and press the OK
button as often as necessary until the LED for the desired remote control option (TV, SAT1 or S AT 2)
flashes briefly.
The currently set remote control code will be displayed, as the appropriate LED flashes, while pressing
the button.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TECHNISTAR K4 ISIO and is the answer not in the manual?

TechniSat TECHNISTAR K4 ISIO Specifications

General IconGeneral
Product colorBlack
Supported video modes576i, 576p, 720p, 1080i, 1080p
Audio formats supportedAC3
Video formats supportedAVC, MPEG1, MPEG2, MPEG4
HDMIYes
USB version2.0
USB port typeUSB Type-A
USB ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Tuner typeDigital
Demodulation16-QAM, 32-QAM, 64-QAM
Audio decodersDolby Digital
Interactive TV-
Frequency range47 - 862 MHz
Number of tuners4 tuner(s)
Channels quantity4999 channels
On Screen Display (OSD) languagesCZE, DEU, DUT, ENG, ESP, FRE, HUN, ITA, LIT, POL, POR, RUS, SWE, TUR
Signal sourceCable, Ethernet (RJ-45), Satellite
Video resolutions1920 x 1080 pixels
Digital signal format systemDVB-C
Display digits4 digits
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 75 %
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)3.4 W
Power consumption (typical)8.4 W
ReceptionHD-TV, SD-TV, radio
Symbol rate1.5 - 7.2 Mbaud
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
Package depth212 mm
Package width396 mm
Package height56 mm
Package weight1170 g
Weight and Dimensions IconWeight and Dimensions
Depth135 mm
Width280 mm
Height38 mm
Weight500 g

Related product manuals