TechniSat TECHNISTAR S5 User Manual

13
EN
4.1 Switching the device on and o
> When the device is on standby, you can switch it on by pressing the On/
Standby buon on the remote control.
> When operating normally you can switch the device to standby mode by
pressing the On/Standby buon.
To switch the device on/o, also take note of further instructions in the
instruction manual.
4.2 Retrieval of the main menu and menu navigation
The following example will illustrate how you can reach the main menu and retrieve a
sub-menu. The objective of the example is to retrieve the Picture seings menu.
> Aer pressing the Menu buon the main menu appears on the screen.
> Select theSeingsmenu item by moving the highlight over this item using
theup/down arrow buons.
> Press the OK buon to open the Seings menu.

TechniSat TECHNISTAR S5 Specifications

General

Brand	TechniSat
Model	TECHNISTAR S5
Category	Receiver
Language	English