TechniSat TECHNISTAR S6

18
EN
4.4.3 Entering numbers
> Use the number buons to enter the new seing you want if a question mark
or a numeric value is displayed.
4.4.4 Virtual keyboard
If is shown on the right next to the set value, the value is altered using the virtual
keyboard. You have three dierent input options when using this data entry method.
You can switch the keyboard layout between the so-called QWERTY keyboard and
the alphabetic keyboard; an SMS keyboard can also be used at any time.
The functionality of the QWERTY keyboard is identical to that of the alphabetic
keyboard. They only dier in the arrangement of the various leers, numbers,
characters and symbols.
> Press the OK buon to open the virtual keyboard. The keyboard now appears
in alphabetic form.
> You can switch to the QWERTY keyboard and back to the alphabetic keyboard
by pressing theOptionOPT buon.
You can now enter the desired term as follows:
Arrow buons: Moves the highlight on the keys of the virtual
keyboard.
OK: The highlighted character is added to the end of
the term, or the highlighted function is executed.
/ Yellow function buon: The keyboard switches between upper case/
lower case.