TechniSat TECHNISTAR S6

39
EN
In order to ensure that DVR timers are only automatically generated for the
programmes you want, you must apply the seings with as much detail as
possible. Otherwise the number of generated timers can become very high.
With automatic DVR timer generation, there could be overlaps with other
timers with the possible result that not all timers are executed.
With series timer generation, the seings for the timer lead-in and lead-
out times and Perfect Recording will be taken into consideration. For more
detailed information please consult the instruction manual.
Caution!!!
Ensure that the receiver has read the correct time. This will be displayed in the info
box during normal operation. If this is not the case, leave your device switched to a
major channel such as ZDF for approx. 30 seconds, to read the time.
9 Function selection
> You can open the Navigation menu (NAV menu) to select the desired function
by pressing the N AV buon (Navigator/function selection).
> Use the up/down arrow buons to highlight the function you want to access.
TV: TV mode: broadcasting of the TV channels.
Radio: Radio mode: broadcasting of the radio channels/Internet radio.
Movies/DVR: Movies/DVR Navigator: retrieval of the video files stored on a device
connected to the USB port.
Music: Music navigator: retrieval of the music tracks stored on a device
connected to the USB port.
Pictures: Picture navigator: retrieval of pictures stored on a device connected
to the USB port.
> Confirm with OK to select the highlighted function.