Technische Alternative UVR61-3 User Manual

116
Table of settings
If the control system fails unexpectedly, all of the settings should be reset for initial
configuration. In this case, problems are inevitable if all of the setting values are entered in
the following table.
If there are questions, this table has to be provided. Only then is a
simulation possible to reproduce the error.
EX ......... factory settings (ex works) CS .......... Controller settings
EX CS EX CS
Values
Sensor S1 °C External value E1
Sensor S2 °C External value E2
Sensor S3 °C External value E3
Sensor S4 °C External value E4
Sensor S5 °C External value E5
Sensor S6 °C External value E6
External value E7
Speed stage SPS External value E8
Analogue stage 1 ANL External value E9
Analogue stage 2 ANL
Basic parameters Par
Equipment version Program PR 0
Linking of output LO OFF Priority assignm. PA OFF
max1 off  75 °C °C max1 on  70 °C °C
max2 off  75 °C °C max2 on  70 °C °C
max3 off  75 °C °C max3 on  70 °C °C
min1 on  5 °C °C min1 off  0 °C °C
min2 on  5 °C °C min2 off  0 °C °C
min3 on  5 °C °C min3 off  0 °C °C
diff1 on  8 K K diff1 off  4 K K
diff2 on  8 K K diff2 off  4 K K
diff3 on  8 K K diff3 off  4 K K
Time window TIME W and TIMER
Time window 1 Time window 2
Outputs OP -- Outputs OP --
Switch-on time  00.00 Switch-on time  00.00
Switch-off time  00.00 Switch-off time  00.00
Time window 3 Timer
Outputs OP -- Outputs OP --
Switch-on time  00.00 Switch-on time  00.00
Switch-off time  00.00 Switch-off time  00.00
Output assignment Output settings
O1 <= OFF Output 1 AUTO
O2 <= OFF Output 2 AUTO
O3 <= OFF Output 3 AUTO

Technische Alternative UVR61-3 Specifications

General

Brand	Technische Alternative
Model	UVR61-3
Category	Dryer
Language	English