What to do if my Technogym Fitness Equipment is not turning on?
If your Technogym Fitness Equipment isn't turning on, first, check if there's a mains power failure by plugging another appliance into the socket to see if it works. Also, ensure the power supply cable is correctly inserted. If these steps don't resolve the issue, it may be due to a damaged power supply cable or burnt-out fuses.
Why is my Technogym Fitness Equipment too noisy?
Excessive noise from your Technogym Fitness Equipment can stem from a few reasons. First, check if the product is level; if not, adjust the feet to level it. If leveling doesn't solve the problem, the noise might be due to damaged bearings or worn transmission components.
What to do if Technogym Fitness Equipment is permanently in emergency status?
If your Technogym Fitness Equipment is stuck in emergency status with locked steps, it could be due to damaged or blocked safety sensors. Try removing any obstructions from the sensor zone.
Mandatory replacement of transmission parts (belts, chains) every three years for product safety and warranty.
Instructions for safely replacing blown fuses with certified ones of identical electrical specifications (3.15A F).
General| Brand | Technogym |
|---|---|
| Model | CLIMB ARTIS |
| Resistance Levels | 25 |
| Connectivity | Wi-Fi, Bluetooth |
| Type | Climber |
| Power Requirements | 100-240V, 50-60Hz |
| Heart Rate Monitoring | Hand sensors, telemetry |
| Power Supply | Mains |
To Next Page