B
A
7 Safety devices and warnings
A - Emergency Stop button: located under the control panel, used to stop
the equipment immediately in the event of an emergency.
A cord connects the switch to a clamp (B) that must be attached to the user’s
clothing. As a result, if the user moves too far from the control panel, the switch
pops out and stops the equipment without having to touch the controls.
To reset all the equipment’s functions, return the switch to its original position,
then press any key.
To return the clamp in its seating, wind the cord in the direction shown in the
gure.
Warning
Before using the equipment check that the switch is in perfect working
order and attach the clamp to the clothing.
To Next Page
Loading...
