12
Cable Jungle
C C
E
Assembly
Assemble one weight stack at a time.
For every weight stack take the crosspiece (E) from the crate and then take the
weights out one by one, starting from the last one (the one with the highest
number), and insert them in guide rails (C) from above.
WARNINGS
The weights must be assembled with the selection holes facing the
outside of the equipment and the numbers upright.
To keep the weights in the correct order always take them out of the
packaging and insert them ONLY one at a time; this will ensure that
the numbers stamped on the weights will be in the right order in each
weight stack.
To Next Page
Loading...
