Technogym Step 500i SP - Pause Time

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.3
9.1.5. PAUSE TIME
It is possible to set a maximum pause time for each exercise in seconds, with values ranging from
10 to 999. To change the setting, when the display shows the current maximum time:
PAUSE TIME : xxx
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then use the number keys to enter the desired new
value.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 60.
9.1.6. ENABLE TGS
It is possible to enable or disable the use of the TGS reader. To change the selection, when the
display shows the current setting:
TGS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
TGS
ENABLED <default>
DISABLED
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.7. ENABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the display shows the current setting:
KEYS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
KEYS
ENABLED <default>
DISABLED
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.8. MODIFIABLE TARGET HEART RATE
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the display shows the current setting: