Technogym Step 500i SP - R Equired Tools

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 11.2
11.2. REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• 13-mm wrench;
• 17-mm wrench;
• 3-mm Allen T-wrench;
• 4-mm Allen T-wrench;
• 5-mm Allen T-wrench;
• 6-mm Allen T-wrench;
• 8-mm Allen T-wrench;
• Snap ring pliers;
• 17-mm ring nut spanner
• Torque wrench;
• Flatness comparator.
• PC equipped with Service Excite Loader
ATTENTION: The tool sizes are expressed in mm.