Synchro Excite
17
Electrical connection (mains powered version)
Before connecting the equipment to the mains power supply, ensure that the electrical system specications comply to binding regulations. Check the
mains power supply specications on the label applied to the frame under the control panel.
Plug the power cable rst into the equipment socket and then into the wall socket.
W
The wall socket must be located in a place where the plugging and unplugging can be done easily and safely.
When plugging in, the switch on the equipment must be in the 0 position (i.e. the equipment must be switched o).
Check the state of the power supply cable periodically.
To Next Page
Loading...
