Technogym SYNCHRO - Changing Fuses (Mains Powered); Fuse Replacement Procedure

Synchro Excite
23
Changing the fuses (mains powered version)
W
Before changing the fuses, switch the equipment o by switching the switch
to 0 and unplug the power cable plug from the wall socket.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one as supplied (3.15A (F).
Fit the fuse holder back into its housing, making sure it clicks in properly.
W
If no more of the supplied fuses are available, use certied fuses with identical electrical specications (3.15A (F) for the replacement.