Synchro Excite
24
Recharging the battery (battery-powered version)
In the battery-powered version, the platforms must be kept in motion to ensure that the
equipment remains switched on. If, when you stop moving the platforms, the control panel
switches o without warning, the battery will have to be recharged.
Charger electrical specications:
Input 100÷240 Vac 0,8 A 50/60 Hz
Output 15 V dc 24W
Class II
W
Only use devices that comply with applicable standards.
Do not use the equipment while the battery is recharging.
To Next Page
Loading...
