Synchro Excite
33
Switching on and o
To turn the mains powered version of the equipment o, switch the main switch to “0” (OFF)
position.
The equipment must be switched o only at the end of the exercise, when in standby.
If the equipment isn’t going to be used for a long time, as well as turning it o you should also
pull the plug out of the wall socket.
W
The switch is for turning the equipment on and o but does not isolate it
completely from the mains voltage, even in the “0” position (o). For complete
isolation you must unplug the power supply plug.
To turn the battery-powered version of the equipment o, just stop moving.
To Next Page
Loading...
