TECHNOLOG Cello 4S - User Manual

Product manual
Cello 4S data logger
C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 1 of 43
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom
T: +44 (0) 1629 823611
E: techsupport@technolog.com
www.technolog.com
DMR No.: 7504
2099PM9000 Rev. B

Summary

Forward

Considerations

Environment

Suitable for non-hazardous locations, -20°C to +50°C ambient temperatures, IP68 rated.

Installation

Must be carried out by trained personnel following applicable codes of practice.

Approvals

Refer to Technolog Declaration of Conformity document 2099DC9000 for details.

Precautions

Handling

Handle Cello 4S with care. Sudden impacts may affect operation and invalidate warranties.

Cleaning

Clean only with water and a clean cloth. Do not use solvents or detergents.

Lithium batteries

Use approved batteries, handle with care, and dispose of responsibly. Avoid mistreatment.

Disposal; end of life

Dispose of as electrical/electronic equipment responsibly, not as municipal waste.

Dimensions

Typical installation: Moulded wall bracket

Typical installation: Stainless steel wall bracket

Typical installation: Boundary box, meter pit, vault or similar

Standard connections: Overview

Standard connections - Port 1: Local communications (COMMS)

Standard connections - Port 2: External power

Standard connections - Port 3: Two signal input (analogue and; or digital) connection

Standard connections - Port 3: Local communications (COMMS)

Standard connections - Port 4: Internal pressure sensor

Standard connections - Port 4: External pressure sensor connection

Standard connections - Port 4: Universal eight signal connection

Standard connections - Port 4: Encoder connection

Standard connections - Port 5: External antenna connection

Standard connections - Port 6: Internal pressure sensor

Standard connections - Port 6: External pressure sensor connection

Standard connections - Port 6: Universal eight signal connection

Standard connections - Port 6: Encoder connection

Standard connections: Channel mapping

Standard connections: Channel shadowing

Unit identification

Entering the enclosure

SIM card replacement

Internal battery pack replacement

Universal eight signal input (4-20 mA) dip switch setting options

Refitting the enclosure lid

Installation; maintenance: Local Wi-Fi communications

TECHNOLOG Cello 4S Specifications

General

Brand	TECHNOLOG
Model	Cello 4S
Category	Data Loggers
Language	English