TecJet S Series User Manual

3"/"24"
"
"
User Manual
Thank"you"for"purchasing"TECJET"printers."Hope"you"have"a"good"operating"experience."
"
In"order"to"safely"and"correctly"use"printers,"please"read"this"manual"carefully"and"op era te"as "it"
informs."If"n o t,"it"may"cause"so me"bad"damages."
"
All"Rights"Reserved"by"printers."
"
"
Contents"
1 Safety"Instructions".................................................................................................................."3"
1.1 Power"
1.2 Printing"Cautions"
1.3 Installing"Environment"
1.4 Ink"Placemen t"
"
2 In s ta lla tio n "Requirements ........................................................................................................ 4"
2.1-2.7"Body"installations"
2.8 Operating"Panel"
2.9 Media"Installation"
2.10 Distance"between"Printhead"and"Media"
2.11 Ink"Installatio n "
2.12 Single"Printhead"In s ta llat io n "and"Connecting"
2.13 Ink"Color"Order"
2.14 Carriage"Board"and"Cable"Connecting"
"
3 About"Printing"Operation… ................................................................................................... 13"
3.1 Start"to"Use"
3.2 How"to"Calibrate"
3.3 Set"Calibration"IP"Address"
3.4 How"to"Use" Calibration"Software"
"
4 How"to"Install"Software ....................................................................................................... 19"
4.1 Step"One:"Decompress"the"Software"
4.2 Step"Two:"Select"Installation"Folder"
4.3 Step"Three:""
4.4 Step"Four:"Select"”Res ta rt "la te r” "and"Press”Close”"
4.5 Step"Five:"

TecJet S Series Specifications

General

Brand	TecJet
Model	S Series
Category	Printer
Language	English

Summary

TecJet S Installation Requirements

Printhead Installation and Connecting Guide

Detailed steps for installing and connecting various printhead models (XP600, DX5, DX7, 5113).

Carriage Board and Cable Connecting

Instructions for connecting the carriage board and associated cables for different printhead types.

TecJet S Printing Operation

Calibration IP Settings and Software Use

Detailed steps for setting IP addresses and using the calibration software for printhead adjustments.

Feeding Calibration Procedure

Steps to perform feeding calibration and adjust print settings based on observed results.

TecJet S Software Installation

Maintop Software Installation Steps

Step-by-step guide for decompressing, selecting folder, and installing Maintop software.

Printer Setup and Driver Configuration

Custom Printer and Color Curve Installation

TecJet S Common Questions and Answers

Printer Operation & Carriage Movement Issues

Ink Output & Print Quality Troubleshooting

Diagnosing and fixing issues related to ink output, quality, and color.

Connection, Media, and Printing Errors

Print Quality and Resolution Issues

Addressing printing quality, resolution, spitting, color cast, and image size problems.