TECNA T Series - User Manual

Questions and Answers

R
Raymond FigueroaAug 11, 2025
What to do if the TECNA Industrial Equipment breaker operates with reduced power?
- M
  marshallzoeAug 11, 2025
  If your TECNA Industrial Equipment breaker operates with reduced power, several factors could be the cause. First, the pressure in the hydraulic system might be too low, requiring you to check the hydraulic system on the support frame and increase the pressure. High hydraulic oil temperature can also cause this issue. Another potential cause is leakage in the hydraulic system, which would need to be checked and repaired. Additionally, a defect in the accumulator, indicated by strongly vibrating pressure hoses, may require removing or replacing the diaphragm by an authorized service. Finally, a low oil flow rate could be the culprit, necessitating an increase in the oil flow rate.
A
angelarodriguezAug 20, 2025
How to troubleshoot a TECNA T Series breaker that does not operate?
- B
  Bill HarveyAug 21, 2025
  If the TECNA Industrial Equipment breaker does not operate, it could be due to several reasons. One possibility is the absence of pressure in the hydraulic system, requiring you to check the hydraulic system on the support frame. Another reason could be excessively high hydraulic oil temperature, which also requires checking the hydraulic system on the support frame. Lastly, ensure the hydraulic breaker is properly connected to the hydraulic hoses intended for it.
R
Raymond CastroAug 31, 2025
Why is my TECNA T Series breaker operating very irregularly?
- T
  travisbowmanAug 31, 2025
  If the TECNA Industrial Equipment breaker operates very irregularly, there are a few potential causes. One cause could be alternating pressure in the hydraulic system, which means you should check the hydraulic system on the support frame. High hydraulic oil temperature can also lead to irregular operation, also requiring a check of the hydraulic system. Another possibility is leakage in the hydraulic system, which would need to be checked and repaired.