TECNA T Series - Mounting the Hydraulic Breaker; Unpacking; Mounting Conditions; Required Tool

www.tecnaonline.com - info@tecnaonline.com
ENGLISH
6 MOUNTING THE HYDRAULIC BREAKER
PAR DESCRIPTION
6.1 UNPACKING
6 MOUNTING THE HYDRAULIC BREAKER
PAR DESCRIPTION
6.2 MOUNTING CONDITIONS
Dispose of the packaging as per the country-specific regulations.
Contact your dealer for more information regarding the accessories.
You must comply with the environmental conditions specified in the Technical Details for mounting.
The quick-changer must be attached properly to the support frame and must be functional.
6 MOUNTING THE HYDRAULIC BREAKER
PAR DESCRIPTION
6.3 REQUIRED TOOL
You can mount and remove the hydraulic breaker using commercial tools.
6 MOUNTING THE HYDRAULIC BREAKER
PAR DESCRIPTION
6.4 NECESSARY ACCESSORIES
You need the following accessories for mounting the hydraulic breaker on the support frame:
•
Hydraulic hoses (for connections, see Technical Details of the hydraulic breaker and the support
frame operating manual).
OPERATING MANUAL - Hydraulic breakers T series
17
/
44
REV 0.0
MOUNTING THE HYDRAULIC BREAKER
6