www.tecnaonline.com - info@tecnaonline.com
ENGLISH
8 OPERATION
PAR DESCRIPTION
8.3 INFORMATION REGARDING THE MODE OF OPERATION
•
Use the hydraulic breaker only for removing stones, concrete and other solid material.
•
Use the correct tool and method for the corresponding material when working, see chapter
"9. TOOL" on page 32.
•
Use a moil point or chisel tool for breaking the material by penetrating into it.
FIGURE 12: Breaking the material by
penetrating
FIGURE 13: Breaking the material using a
mechanical pressure wave
•
Use a blunt tool for breaking the material using pressure wave.
OPERATING MANUAL - Hydraulic breakers T series
27
/
44
REV
0.0
OPERATION
8
To Next Page
Loading...
