TECNA T Series - Table of Contents; Contents

0 CONTENTS
PAR DESCRIPTION
0 CONTENTS
0 CONTENTS 2
1 GENERAL INFORMATION 3
1.1 FOR THE OPERATING PERSONNEL 3
1.2 LIABILITY 4
1.3 FOR BETTER UNDERSTANDING OF THIS MANUAL 4
2 SAFETY 5
2.1 INTENDED USE 5
2.2 QUALIFICATION OF THE PERSONNEL 5
2.3 PROHIBITION, WARNING, MANDATORY AND INSTRUCTION SIGNS ON THE DEVICE 6
2.4 BASIC SAFETY INSTRUCTIONS 7
2.4.1 General instructions 7
2.5 DUTIES OF THE OPERATOR 10
2.6 PERSONAL PROTECTIVE EQUIPMENT 10
3 SCOPE OF DELIVERY 11
3.1 SCOPE OF DELIVERY 11
4 PRODUCT DESCRIPTION 12
4.1 TECHNICAL SPECIFICATIONS 12
4.2 DEVICE DESCRIPTION 12
4.3 PRODUCT IDENTIFICATION 13
5 TRANSPORT AND STORAGE 14
5.1 TRANSPORT AND STORAGE / MANUAL TRANSPORTATION 14
5.2 TRANSPORTATION USING A LIFTING TOOL 15
5.3 MOVING THE SUPPORT FRAME USING THE MOUNTED HYDRAULIC BREAKER 16
5.4 STORAGE 16
6 MOUNTING THE HYDRAULIC BREAKER 17
6.1 UNPACKING 17
6.2 MOUNTING CONDITIONS 17
6.3 REQUIRED TOOL 17
6.4 NECESSARY ACCESSORIES 17
6.5 MOUNTING 18
6.6 FITTING AND REMOVING THE PLUG TOOL 20
6.7 CONNECTING THE HYDRAULIC BREAKER HYDRAULICALLY 22
7 COMMISSIONING 25
7.1 FIRSTCOMMISSIONING;RE-COMMISSIONINGAFTERASTANDSTILL    25
8 OPERATION 26
8.1 OPERATING RANGE 26
8.2 SITE SELECTION 26
8.3 INFORMATION REGARDING THE MODE OF OPERATION 27
8.4 PROCESS FLOW 31
8.5 UNDERWATER OPERATION 31
9 TOOL 32
9.1 TOOL 32
10 MAINTENANCE (DIN EN 31051) 33
10.1 CLEANING AND SERVICING 33
10.2 INSPECTION AND MAINTENANCE 34
10.2.1 Establishing pressure relief on the hydraulic system 34
10.2.2 Log 34
10.2.3 Information regarding the maintenance and inspection body 34
10.2.4 Maintenance and inspection plan 35
10.3 REPAIRS 37
10.3.5 Nitrogen charging of the oil nitrogen accumulator 37
10.3.6 Replacing hydraulic lines and hoses 38
10.4 SPARE AND WEAR PARTS 38
11 REMOVING THE HYDRAULIC BREAKER FROM THE SUPPORT FRAME 39
11.1 REMOVING THE HYDRAULIC BREAKER FROM THE SUPPORT FRAME 39
12 DISPOSAL 41
12.1 DISPOSAL 41
13 CAUSE OF MALFUNCTION AND TROUBLESHOOTING 42
13.1 CAUSE OF MALFUNCTION AND TROUBLESHOOTING 42
14 ANNEX 43
14.1 TOOL PASTE 43
14.2 PROOF OF MAINTENANCE 44
OPERATING MANUAL - Hydraulic breakers T series
2
/
44
REV 0.0
CONTENTS
0