EV 10-50
23
Wireless hybrid arm sy em
Wireless hybrid arm sy em
The program LED
lashes slowly
Program
status
LED
Operations
At the end of the Time-out
the reader turns off
The program LED
fl ashes fast
Program selected Program armedProgram arming
Program LEDs off
Programs disarmed
Press the button
Move the key close to
activate the reader
Press the button, one or
more times, until the desired
program is selected
To arm another program repeat
the sequence
The program LED
fl ashes fast
Program
status
LED
Operations
Program disarmedProgram selected
Program LEDs on
Programs armed
Program LED off
Press the button
Press the button, one or more times,
until the desired program is selected
Move the key close to
activate the reader
To arm another program
repeat the sequence
Program disarming
The procedure allows you to disarm one program at a time, to disarm more programs repeat the procedure. Disarming is carried out in three stages
1 Turn on the reader
Press the button
2 Activate the reader Move the key up to the reading area
3 Select the program Press the button, one or more times, until the desired program is selected
Program arming
The procedure allows you to arm one program at a time, to arm more programs repeat the procedure. Arming is carried out in three stages
1 Turn on the reader
Press the button
2 Activate the reader Move the key up to the reading area
3 Select the program Press the button, one or more times, until the desired program is selected
3-1.2 - Program selection by button
To Next Page
