Quick Start Setup 4
Quick Start Setup
This section is a simple 5-steps guide to connecting, programming and operating your new SG2 smart relay. This is
not intended to be the complete instructions for programming and installation of your system. Many steps refer to
other sections in the manual for more detailed information.
Install SG2 Client Software
Install the SG2 Client Software from CD or from the free internet download at
www.taian-technology.com
Connect Power to SG2 smart relay
Connect power to the Smart Relay using the below wiring diagrams for AC or DC supply for the applicable modules.
See “Chapter 2: Installation” for complete wiring and installation instructions.
To Next Page
Loading...
