Need help?Do you have a question about the TECO SG2-10HR-A and is the answer not in the manual?
General| Coil Voltage | 100VAC |
|---|---|
| Contact Rating | 10A 250VAC / 30VDC |
| Insulation Resistance | 1000MΩ min at 500V DC |
| Vibration Resistance | 10 to 55 Hz at 1.5mm double amplitude |
| Shock Resistance | 100 m/s² (10G) |
A guide to connecting, programming, and operating the SG2.
Instructions for mounting the SG2 smart relay.
Guidelines for wiring the SG2 smart relay.
Introduction and features of the SG2 Client software.
Overview of the environment for Ladder programming.
Overview of the environment for FBD programming.
Explanation of fundamental components in Ladder Logic.
Details on SET, RESET, and Pulse output instructions.
Details on timer functions and their modes.
Details on counter functions and their modes.
Instructions for PID function blocks.
Instructions for Modbus RTU master communication.
To Next Page
