30
Function Description
.
Fn_00: Drive Capacity Selection = 1 - 40
Fn_00 MODEL NO Fn_00 MODEL NO
01 N2-2P5 10 N2-401
02 N2-201 11 N2-402
03 N2-202 12 N2-403
04 N2-203 13 N2-405
05 N2-205 14 N2-408
06 N2-208 15 N2-410
07 N2-210 16 N2-415
08 N2-215 17 N2-420
09 N2-220 18 N2-430
40 N2-230
Fn_01: Acceleration Time = 0.1 ~ 3600 Sec.
Acceleration time means the time it takes the drive to go from 0 speed to target speed. Using the
keypad on the drive can set the acceleration time.
Press the (Key), use your up and down arrow keys to find (Fn_01)
Press the (Key), use your up and down arrows to change the acceleration time.
Press the (Key), again to store the setting.
Fn_02: Deceleration Time = 0.1 ~ 3600 Sec.
Deceleration time means the time it takes the drive to go from one target speed to a slower target
speed. The programming of the Deceleration function is the same as the Acceleration function
above.
DSP
FUN
READ
ENTER
READ
ENTER
To Next Page
Loading...
