10
10
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
Installing the Water Inlet Hose
INSTALLATION
1. Fasten one end of the inlet hose to the tap. Ensure there is a rubber
washer inside the hose before fastening. The washer prevents
water leakage.
2. Securely tighten the other end of the inlet hose to the clothes
washer inlet valve. Ensure the rubber washer is inside the hose
before tightening.
3. When tightening the clamping nut, apply even pressure. Do not
apply too much force or twist the valve as this may damage or
break the valve joint.
• Be sure to install the correct HOT and COLD water inlet hoses. Incorrect
installation can reduce performance or damage the clothes washer.
Caution!
Caution!
To Next Page
Loading...
