10
15
Start
Program
Water Level
Temp.
Delay
Note: other process combinations are similar to above.
Instruction to single wash procedure
Customers can set a single process or a combination for washing, rinsing and
spinning easily according to demand by simply turn off any one or two of these three
indicators that are not required.
• Single wash: after switching on the power, turn off RINSE and SPIN two
indicators by pressing these two keys. The operation for single rinse and single
spin is similar.
• Single wash-spin: after switching on the power, turn off RINSE indicator by
pressing that key. The operation for single rinse-spin and single wash-rinse is
similar.
OPERATIONS
Personalized Setting of Washing Program
Customers can select washing program according to your personal setting, and set
washing function, rinsing function, spinning function, water volume and start time.
On
(Power)
Child Lock
To avoid mis operation by children.
Start
Press Child Lock
Power on
• Press the both buttons for 3sec. to activate/deactivate the "Child
Lock" function.
• The “Child Lock” will lock all buttons except [ On/Off ].
• Cut off the power supply, the "Child Lock" protection will be released.
Caution!
OPERATIONS
Water Level
Program
Personalized Setting of Washing Program
to actual demand, and set rinsing
Customers can select washing program according
times、water level and appointment time.
Customers can set single process or combinations of washing、rinsing and spinning
freely according to demand. Detailed operations as follows for different models:
Note: other process combinations are just like above.
Operations of Washing Process
Washing Process
StartOn
Rinse
Delay
Function
Temp.
Wash Spin+Rinse+
Spin
keep pressing Function key until
spinning light is on only
keep pressing Function key until
washing
、
rinsing
、
spinning lights are on
press Rinse separately,
set parameters
On
On
Start
Start
One Touch Smart Wash
On Start
To Next Page
Loading...
