TECO TWM100TCM - Options

Delay
Set the Delay function:
1. Select a program and / or functions.
2. Press the Delay button to choose the time(the delaying time is 0-24H.)
3. Press [Start/Pause] to commence the delay operation
Choose Program and/
or other functions
Start
On
Setting time
Delay
Options
Caution!
• If there is any power outage while the machine is operating, a special
memory stores the selected programme and when the power is
restarted, press the
[Start/Pause] button the program will continue.
14
Temp.
Press the button to regulate the Hot, Warm or Cold water for wash.
Water Level
Select water level according to clothing categories, degree of soiling and
washing habits from lowest 1(light), 2(flash), 3(light),.. to 6(flash) max.
Wash
select desired wash time 6, 9 or 12 in minutes.
OPERATIONS
(Power)
Rinse
select desired rinse times. 1, 2 or 3 times.
Spin
select desired spin time 3, 5 or 7 in minutes.
Confirmation of the delay and inspection
1. After the delay function is started, the corresponding delay light will flash, and other lights
are turned off.
2. After the delay function is started , press “ Delay” button continuously , you may inspect
the preset program and function . Loose the button , the program return to delay status.
Cancel the delay time, or alternate the delay time
1.. Press “ Power” button to cancel the delay tim
2. To change the delay time , cancel the delay time first ,
and then press “Delay” button to reset.
RemainTime(mins)
Options
15
OPERATIONS
Child Lock
To avoid mis operation by children.
Start
Press Child Lock
Power on
select water level according to clothing categories, degree of soiling and washing
habits of customers
rinsing times settings can be selectable
FCS
Start
ON/OFF
Delay
1. Select a program
2.Press the Delay button to choose the time
3.Press [
Start/Pause] to commence the delay operation
Choose the Program
Start
On
Setting time
Delay
It should be pressed before
starting the program. If the program already started, should press the [On/Off]
button to reset the program.
Press the [Delay] button until the Delay light is off .
Caution!
•
.
If there is any break in the power supply while the machine is operating, a
special memory stores the selected program and when the power is restarted
Function
combination of soaking, washing, rinsing and spinning light is available
Press the button to regulate the Hot, warm, cold water for wash.
Only for washers having these function.
• Press the two button also to be released the function.
• The “
Child Lock” will lock all buttons except [ On/Off ].
Caution!
Temp.
Water level
Rinse
The FCS light
(Press both Program and Temp. button together)
(Press both Rinse and Program button together)