TECOM TS1066 - Warning; Related Documentation

8
Table 1: TS1066 shipping list
Quantity
Item
1
TS1066B board
1
TS1066 Network Access Controller Installation Manual
7
M3 x 10 pan head screws
6
Standoff board mounts
12
3-way plug-on screw terminal connectors
14
2-way plug-on screw terminal connectors
2
Battery leads (combined negative and fused positive)
1
1K 1/4 watt resistor
16
10K 1/4 watt resistors
5
Link jumpers
Warning
Take appropriate precautions if working on an active or
recently de-powered device.
The circuit board and the heatsink on the Network
Access Controller board may be hot.
Do not touch.
Related documentation
The ChallengerPlus Installation and Quick Programming Manual and
ChallengerPlus Programming Manual provide detailed information about
configuring and programming a ChallengerPlus system.
The ENC-LGE Large Enclosure Installation Manual provides instructions for
installing the ENC-LGE Large Enclosure.
The TS1066 Network Access Controller Programming Manual provides detailed
information about configuring and programming the Network Access Controller.
The Challenger system is modular. Refer to the documentation that is shipped
with each module that you intend to use.