TECshow NAVIGATOR 24 XL User Manual

NAVIGATOR 24XL
P.
5
ENGLISH VERSION
26 STEP Used to go to the next step when the speed slider is set in Show Mode or in Edit
Mode.
27 Add kill/
Rec exit
In Add Mode, multiple scenes or Flash Buttons will be on at the same time. In Kill
Mode, pressing any Flash Button will kill any other scenes or programs. Rec Exit is
used to exit from Program or Edit Mode.
28 Blackout Used to kill all output, with excepetion of Full On.
29 Audio Level Fader Adjusts the audio sensitivity when in Audio Ttrigger mode of scenes.
30 Speed holder Used to adjust the speed of Scenes/Chases running.
31 Fade fader Adjust the fade-in, fade-out, and cross-fade times.
32 Master A B Adjust overall intensity

Rear
Item Button or Fader Function
1
3-pin DMX output connector DMX control signal
2
5-pin DMX output connector DMX control signal
3
Polarity switch Used to select DMX polarity
4
MIDI Thru MIDI port for connecting to a sequencer or MIDI device
5
MIDI OUT MIDI port for connecting to a sequencer or MIDI device
6
MIDI In MIDI port for connecting to a sequencer or MIDI device
7
Audio Input This jack accepts a line level audio input signal ranging from
100mV to 1Vpp
8
Remote Input Blackout and Full On may be controlled by a remote control using
a standard jack
9
DC Input DC 12-20V, 500mAMin.

TECshow NAVIGATOR 24 XL Specifications

General

Brand	TECshow
Model	NAVIGATOR 24 XL
Category	Controller
Language	English