Tecsun PL-360 User Manual

TABLE OF CONTENTS
1
CONTROL LOCATIONS................................................... 2
LCD DISPLAY.....................................................................4
TURN ON / OFFTHE RADIO .............................................5
TUNE INTO STATIONS... ...................................................6
●
ETM (Easy Tuning Mode)
●
Manual tuning
●
Auto scan stations
WORKING WITH MEMORIES............................................9
●
ATS - Auto Tuning Storage
●
Manually storing station
●
Semi-auto storing station
DELETE MEMORY........................................................... 10
●
Manual delete memory
●
Semi auto-delete memory
●
Delete all memory
SLEEP FUNCTION...........................................................11
CLOCK SETTING.............................................................12
SETTING THE ALARM TIME...........................................12
...................................................13
................................................................13
.....................................................13
.......................................13
............................................................14
USING THE EXTERNAL ANTENNA................................16
......17
IMPORTANT MATTERS FOR USING BATTERIES.........18
TROUBLE SHOOTING.....................................................19
.............................................................21
TURN OFF THE ALARM
DISPLAY MODE
KEY LOCK FUNCTION
FM ST. (FM STEREO) BUTTON
SYSTEM SETTING
USING THE INTELLIGENT CHARGING FUNCTION
SPECIFICATIONS
20
QUESTIONS ANSWERS SOLUTIONS
-Did not set the
proper radio station
for the alarm.
-Or there are no
broadcasting at
that radio station.
-Or you are in
another city where
does not have a
radio station for
your preset
frequency.
When the alarm
activated (alarm
by radio), there is
only noise with
the broadcast.
-Preset your alarm
station properly
(see the above
setting).
-Make sure it has
radio broadcast in
your location.
-Or set the alarm by
buzzer.
radio malfunction.
This may caused
by interference,
and the computer
microchip not
function properly.
Remove the battery,
then you can reload.
If it is still not able to
work, please contact
your nearest dealer
for customer service.
PL-360

Tecsun PL-360 Specifications

General

Brand	Tecsun
Model	PL-360
Category	Receiver
Language	English