What to do if my Tecsun PL-330 is having static and noise when tuning to stations?
If you are experiencing static or noise when trying to tune into stations on your Tecsun Receiver, try adjusting the direction. If the signal is weak, review the tuning steps and location. Also, consider the length of the MW (AM) radio. If these steps don't help, please try different tuning.
General| Modes | AM, FM, SSB |
|---|---|
| Display | LCD with Backlight |
| Dimensions | 139 x 85 x 26 mm |
| Memory | 850 Stations |
| Frequency Range | LW: 153-513 kHz |
| Power Supply | 3 x AA batteries or USB 5V DC |
| Weight | 230 g (without batteries) |
| Sensitivity | FM < 3uV AM < 1mV/m LW < 5mV/m |
| Speaker | D57 mm |
| Additional Features | ETM (Easy Tuning Mode), Alarm Clock, Sleep Timer, Key Lock |
Instructions on how to power the radio using its internal battery or external power source.
Guide for charging the BL-5C rechargeable lithium battery via USB using a DC 5V/0.5A charger.
Steps to set the 24-hour clock time using numeric keys or tuning knobs.
How to configure FM and MW/AM frequency ranges based on geographical region.
How to tune stations manually using the tuning knob and select tuning steps.
Step-by-step guide for manually saving radio frequencies into memory presets.
Automatically scans and stores stations for FM, LW, MW, and SW bands.
Manually saving stations found during an auto scan to prevent unwanted storage.
Procedure to remove a specific radio station from the device's memory.
Process to simultaneously erase all saved stations from the radio's memory.
Overview of ETM+ for auto tuning and storing stations without overwriting regular memory.
Guide on initiating ETM+ scans and manually adding missed stations.
Procedure for removing individual stations from the ETM+ memory.
Solutions for device power problems and unexpected shutdowns.
Fixes for ATS/ETM skipping stations or stored stations being noisy.
To Next Page
