EasyManuals Logo

Tecsun PL-330 User Manual

Tecsun PL-330
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
www.tecsunradios.com.au
8
SW / SSB Meter Band Selection
Quick press [ < ] or [ > ] to change SW or SSB meter bands:
SW meter bands: 120m / 90m / 75m / 60m / 49m / 41m / 31m / 25m / 22m /
19m / 16m / 15m / 13m / 11m
SSB meter bands: 160m / 80m / 60m / 40m / 30m / 24m / 20m / 17m / 15m /
12m / 10m
WORKING WITH STATION MEMORIES
This device can store 850 stations (presets) into memory: 100 each for FM
and LW, 150 for MW (AM), 300 for SW, and 100 each for SSB and SYNC.
You may choose any of the below methods to store stations.
Storing Stations Manually
1) In VF mode, press the [ FM/ST. ], [ MW/LW ], [ < ] or [ > ] button to select
the frequency band.
2) Tune into the new radio frequency to be stored.
3) Quick press the memory [ M ] button, “PRESET” will flash in the top right
corner of the display to indicate the next available memory location.
If desired, select a different memory location by using the [ TUNING ] knob
or the numeric keys.
4) Quick press the [ M ] button again to confirm the location or wait for about
2 seconds to automatically store the station into memory.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tecsun PL-330 and is the answer not in the manual?

Tecsun PL-330 Specifications

General IconGeneral
ModesAM, FM, SSB
DisplayLCD with Backlight
Dimensions139 x 85 x 26 mm
Memory850 Stations
Frequency RangeLW: 153-513 kHz
Power Supply3 x AA batteries or USB 5V DC
Weight230 g (without batteries)
SensitivityFM < 3uV AM < 1mV/m LW < 5mV/m
SpeakerD57 mm
Additional FeaturesETM (Easy Tuning Mode), Alarm Clock, Sleep Timer, Key Lock

Related product manuals