www.tecsunradios.com.au
USING THE DEVICE
Turning the device on/off: Quick press the [ POWER ] button.
Volume control: Rotate the [ VOLUME ] knob upwards or downwards to
select your desired volume level.
VF (View Frequency) and VM (View Memory)
VF: VF mode is used when searching for new radio signals. Press the
[ VF/VM ] button. When the station frequency indicator flashes twice, the VF
mode is activated.
VM: VM mode is used for looking up stations that have been stored into
memory. Press the [ VF/VM ] button. When the station memory preset
indicator on the display flashes three times, the VM mode is activated.
Using the Radio's Antennas
FM / Shortwave (SW): When listening to FM or shortwave radio, extend the
antenna and adjust its length and direction in order to get the optimum
reception. You may also choose to connect an external antenna by
connecting it to the [ FM & SW ANTENNA ] socket (3.5mm).
Caution! Waterproof and lightning protection measures must be taken when
using outdoor antennas.
Medium Wave (MW) / Long Wave (LW):
This radio uses an internal ferrite bar antenna to receive medium wave and
long wave broadcasts, the quality of which can be enhanced by changing
the position and direction of the device.
6
To Next Page
Loading...
Need help?
General
