To Next PageTo Next Page
Need help?Do you have a question about the Tecsun PL-600 and is the answer not in the manual?
General| Type | Portable Receiver |
|---|---|
| FM Frequency Range | 87 - 108 MHz |
| AM Frequency Range | 520 - 1710 kHz |
| SW Frequency Range | 1711 - 29999 kHz |
| Tuning System | PLL Synthesized |
| Display | LCD |
| Modes | FM, AM, LW, SW |
| Audio Output | Built-in Speaker, Headphone Jack |
| Power | 4 x AA batteries |
| Antenna | Telescopic Antenna |
How to engage and disengage the control lock feature.
Connecting an external antenna for improved reception.
Explanation of the display elements when the radio is off.
Explanation of the display elements when the radio is on.
Details about the memory display area.
Information on the shortwave meter band display.
Details regarding the system set code display.
List of items included in the PL-600 package.
Instructions for correctly inserting batteries into the PL-600.
Guidelines to avoid battery acid leakage and damage.
How to power the PL-600 using the provided AC adaptor.
Procedure for charging rechargeable batteries within the PL-600.
Detailed steps for charging Ni-MH batteries in the PL-600.
Methods for powering the radio on and off.
Understanding the display indicators for signal and battery.
How to adjust volume and tone settings.
Connecting and using earphones with the PL-600.
How to choose between FM, MW, LW, and Shortwave bands.
How to receive FM broadcasts in stereo.
Adjusting MW/FM settings for specific regions.
Methods for tuning into radio stations.
Using buttons or knob for precise frequency tuning.
Automatic scanning for radio stations.
Entering frequencies directly using the keypad.
Fine-tuning stations with the physical tuning knob.
Switching between fast and slow tuning modes.
Adjusting bandwidth for interference reduction.
Guide to using the Single Side Band reception feature.
Instructions for setting the device's clock accurately.
How to program the wake-up timers for the PL-600.
Procedure to save a radio station for timer playback.
How to enable or disable the set timers.
Details on how to use the snooze function for alarms.
Method for setting clock using UP/DOWN buttons.
Method for setting clock using the numeric keypad.
Method for setting clock using the tuning knob.
Step-by-step guide to saving radio stations into memory.
How to navigate between different memory pages.
Methods to retrieve saved radio stations from memory.
Using keypad for direct access to memory presets.
Searching through memory presets manually.
Automatic scanning of stored memory stations.
How to remove a specific station from memory.
Procedure to clear all stations from a memory page.
Instructions for relocating saved radio stations.
How to configure memory page layouts.
Reference table for system set codes and their functions.
Procedure to modify system set codes.
Default system settings as shipped from the factory.
How to view the current system set codes and settings.
How to operate the display backlight function.
Adjusting the antenna gain for optimal reception.
General advice for optimal shortwave radio reception.
How to choose specific shortwave meter bands on the PL-600.
Using auto-scan function for shortwave frequencies.
Explanation of what shortwave broadcast stations are.
Benefits and reasons for enjoying shortwave broadcasts.
List of common shortwave frequencies for aeronautical use.
List of common shortwave frequencies for maritime use.
How to perform a system reset on the PL-600.
Steps to resolve issues when the PL-600 does not power on.
Resolving sudden power-offs during battery operation.
Resolving sudden power-offs during AC adapter use.
Steps to fix erratic behavior of the PL-600.
Tips for improving weak signal reception.
Resolving issues with no audio output from the speaker.
Fixing distortion caused by very strong local stations.
Addressing issues related to battery acid leakage.
