TUNING MODE FAST TUNING SLOW USING THE BANDWIDTH BUTTON
The BANDWIDTH button (29) is used
TUNING
The TUNING-FAST/SLOW button (5) when listening to WM and SW stations.
allows selection of fast or slow tuning Its purpose is to help minimize
when using the tuning knob or the UP interference. The preferred setting is
and DOWN controls. FAST or SLOW WIDE, which provides best audio fidelity.
appear in the display. When tuning with Use NARROW when there is
the tuning knob (25), fast tuning is usually interference. W or N will appear in the
appropriate. When tuning with the UP and display.
DOWN buttons, use slow tuning to tune in
stations and fast tuning to move up or
down frequency at a rapid rate. Then use
slow to actually tune in stations.
Experiment with this control to see which
tuning mode that you prefer.
BASIC RADIO OPERATION continued
To Next Page
Loading...
Need help?
General
