7 SYSTEM SET CODES
System Set Codes allow the radio to be tailored to your needs by changing certain
programmable functions. These functions and their descriptions are noted in the table.
CODE NUMBER
00 (factory default setting)
20
25
50
55
55 (factory default setting)
09 (factory default setting)
10
FUNCTION
Divide the memories into 10 pages with
50 locations
Divide the memories into 20 pages with
25 locations
Divide the memories into 25 pages with
20 locations
Divide the memories into 50 pages with
10 locations
Activate LW band
Deactivate LW band
Set the tuning steps for MW to 9KHz
Set the tuning steps for MW to 10KHz
IN DISPLAY
10:50
20:25
25:20
50:10
ON
OFF
9kHz
10kHz
SYSTEM SET CODE TABLE
28
29
76
87 (factory default setting)
Rechargeable battery to be used
Normal AA battery to be used
Set the FM frequency range to 76-108MHz
(for Japan)
Set the FM frequency range to 87-108MHz
Ni-MH
76 108
87 108
12 Set the clock system to 12 Hr format 12H
24 (factory default setting) Set the clock system to 24 Hr format 24H
PL-450 OWNER'S MANUAL
To Next Page
Loading...
Need help?
General
