TECSYSTEM NT935 User Manual

7
NT935
SERIES
(*)On demand, available version from -40°C to 200°C with alarm temperature management range from 0°C to 200°C
TECHNICAL SPECIFICATIONS
NT935 BASIC NT935 AD
Housing
NORYL 94 _V0
● ●
Absorption 7,5VA
● ●
Data memory 10 years minimum
● ●
Digital
linearity
of sensor
signal
● ●
Self-diagnostic circuit
● ●
Protection treatment of the electronic part
Option Option
DISPLAY AND DATA MANAGEMENT
2x13mm displays with 3 digits to display temperatures, messages and
channels
● ●
3 LEDs to display the state of the alarms of the selected channel
(ALARM-TRIP-FAULT)
● ●
4 leds selection of display mode (SCAN-AUTO-MAN-T-MAX)
● ●
2 LEDs to display the state of FAN1 and FAN2
● ●
Temperature control from 0°C to 240°C (*)
● ●
2 alarm thresholds for channels 1-2-3
● ●
2 alarm thresholds for channel 4
● ●
2 ON-OFF thresholds for FAN 1 and FAN 2
● ●
Sensor
diagnostics
(Fcc-Foc-Fcd)
● ●
Data memory diagnostics (Ech)
● ●
Access to
programming
through
front
keyboard
● ●
Automatic exit from relay programming, display and test after 1
minute's inactivity
● ●
Incorrect
programming
warning
● ●
Selection between channel automatic scanning, hottest channel or
manual scanning
● ●
Storage of maximum temperatures reached by channels and alarm
status
● ●
Front key to reset the alarms
● ●
Voting
function
● ●
Intellifan function
● ●
Failsafe function
● ●

TECSYSTEM NT935 Specifications

General

Brand	TECSYSTEM
Model	NT935
Category	Controller
Language	English