TECSYSTEM t154 - Page 6

6
T154
TECHNICAL SPECIFICATIONS
T154
TESTS AND PERFORMANCE
Frontal film polycarbonate IP65
●
Housing NORYL 94 _V0
●
Absorption 7,5VA
●
Data memory 10 years minimum
●
Digital linearity of sensor signal
●
Self-diagnostic circuit
●
Protection treatment of the electronic part
Option
DISPLAY AND DATA MANAGEMENT
2x13mm displays with 3 digits to display temperatures, messages and channels
●
3 LEDs to display the state of the alarms of the selected channel (ALARM-TRIP-FAULT)
●
4 leds selection of display mode (SCAN-AUTO-MAN-T-MAX)
●
1 LEDs to display the state of FAN1
●
Temperature control from 0°C to 240°C
●
2 alarm thresholds for channels 1-2-3
●
2 alarm thresholds for channel 4
●
1 ventilation ON-OFF thresholds FAN 1
●
Sensor diagnostics (Fcc-Foc-Fcd)
●
Data memory diagnostics (Ech)
●
Access to programming through front keyboard
●
Automatic exit from relay programming, display and test after 1 minute's inactivity
●
Incorrect programming warning
●
Selection between channel automatic scanning, hottest channel or manual scanning
●
Storage of maximum temperatures reached by channels and alarm status
●
Front key to reset the alarms
●
Failsafe function
●