TECSYSTEM t154 User Manual

12
T154
T154
STEP
PRESS
EFFECT
PRESS
NOTES
1
v
Keep the PRG key pressed until the display
shows PRG SET
2
Select PRG SET for entering in the programming mode or
PRG 1 to restore the default programmed value.
PRG 1 default value
3
The ALARM threshold for (CH 1 - 2 -3) is displayed
Set the desired threshold, the Alarm LED flashes
Default 90°C
4
The TRIP threshold for (CH 1-2-3) is
displayed and the Trip LED flashes.
5
Set the desired threshold
Default 119°C
6
1.2.3 is displayed
the Fan1 LED flashes.
7
Select YES or NO
Default YES
8
The display shows (CH4)
CH4 enabling
9
Set YES or NO
with YES CH4 is enabled,
with NO CH4 is disabled.
10
The ALARM threshold for (CH4) is
displayed, the Alarm LED flashes.
If CH4=NO go to
step 16, Default NO
11
Set the desired threshold
Default 120°C
12
The TRIP threshold for (CH4) is
displayed and the Trip LED flashes.
flashes.
13
Set the desired threshold
Default 140°C
14
CH4 is displayed
the Fan1 LED flashes.
IF CH1.2.3 enabled CH4=
NO it can’t be enabled
15
Set YES or NO
Default NO
16
FAN ON is displayed
the FAN1 LED flashes.
If FAN1=NO go to step 20
17
Set the desired FAN1 ON threshold
Default 70°C
18
FAN OFF is displayed,
the FAN1 LED flashes
19
Set the desired FAN1 OFF threshold
Default 60°C
PROGRAMMING

TECSYSTEM t154 Specifications

General

Brand	TECSYSTEM
Model	t154
Category	Computer Hardware
Language	English