F
UNCTION INDICATORS ON INDOOR UNIT DISPLAY PANEL
a A
UTO indicator
This indicator illuminates when the air conditioner is in AUTO operation.
b DEFROST indicator (For Cooling & Heating models only)
This indicator illuminates when the air conditioner starts defrosting automatically or when the warm
air control feature is activated in heating operation.
c TEMPERATURE indicator
Displays the temperature settings when the air conditioner is operational.
d OPERATION indicator
This indicator flashes after power is on and illuminates when the unit is in operation.
e TIMER indicator
This indicator illuminates when TIMER is set ON/OFF.
C OPERATING TEMPERATURE
Cooling, heating and dehumidifying are most effective at the following indoor and outdoor temperatures:
G
CAUTION
•
If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
•
Room relative humidity less than 80%. If the air conditioner operates in excess of a relative
humidity of 80% in the room, the surface of the air conditioner may attract condensation.
Please set the vertical air flow louver to its maximum angle (vertically to the floor), and set HIGH
fan mode.
•
For maximum ef
fect of your air conditioner always close doors and windows when cooling or
heating.
4
106
Temperature
Mode
Cooling operation Heating operation Dehumidifying operation
Room temperature 17ºC - 32ºC 10ºC - 27ºC 17ºC - 32ºC
Outdoor temperature 18ºC - 40ºC 10ºC - 24ºC 18ºC - 40ºC
S
ignal receptor
man_TS1xx_uk.qxd 10-05-2007 14:12 Pagina 106
To Next Page
Loading...
Need help?
General
