Tecumseh TM SERIES - TC200 Models; TC300 Models

4
I. TC200 Models
A sample TC200 decal is pictured for reference. See
diag. 1-2.
Using model TC200-2015B 2354D as an example, inter-
pretation is as follows: See Table 1-1.
Sample TC200 Decal
2015BTC200 2354D
12 3
1. Engine Model Number
2. Specification Number
3. D.O.M. (Date of Manufacture)
S
A
M
P
L
E
Table 1-1. TC200 Engine Model Code Designations
Code Model Number
T Indicates Tecumseh Engine Manufac-
turer.
C Indicates compact model.
200 Indicates 2.0 cubic inch displacement.
Code Specification Number
2015B Indicates number used for identifying the
parts of the engine.
Code Serial/D.O.M. Designation
2 Is the last digit in the year of manufacture
(1992).
354 Indicates the calendar day of that year
(354th day or December 20).
D Indicates the plant line and shift on which
the engine was built at the factory.
II. TC300 Models
A sample TC300 decal is pictured for reference. See
diag. 1-3.
Using model TC300-3133C(B)5114G as an example,
interpretation is as follows: See Table 1-2.
Sample TC300 Decal
3133C (B)TC300 5114G
12 3 4
1. Engine Model Number
2. Specification Number
3. Warranty Category
4. D.O.M. (Date of Manufacture)
S
A
M
P
L
E
Table 1-2. TC300 Engine Model Code Designations
Code Model Number
T Indicates Tecumseh Engine Manufac-
turer.
C Indicates compact model.
300 Indicates 3.0 cubic inch displacement.
Code Specification Number
3133C Indicates number used for identifying the
parts of the engine.
Code Warranty Code
B Indicates Warranty Information. See
current Operator’s Manual for information.
Code Serial/D.O.M. Designation
5 Is the last digit in the year of manufacture
(1995).
114 Indicates the calendar day of that year
(114th day or April 24).
G Indicates the plant line and shift on which
the engine was built at the factory.
1-2
1-3