F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
®
Teel Standard Shallow Well
Jet Pumps and Systems
Operating Instructions & Parts Manual 3P683D, 3P684D, 2P899A and 3P715B
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Form 5S3766
®
Description
Teel standard shallow well jet pumps (Model Nos. 3P683D, 3P684D and 2P899A)
are corrosion resistant pumps for domestic well installations with suction lifts of
25 feet or less. Teel standard shallow well jet pump system, Model 3P715B, is a
Model 3P684D jet pump mounted on a 6 gallon pre-charged tank (equal to a
fifteen gallon standard tank). Used with drilled (cased), driven point or dug wells,
or in cisterns or lakes. Comes assembled to save on installation. Equipped with a
115/230 volt split phase 1/3 HP or 115/230 volt capacitor start 1/2 or 3/4 HP motor.
Pressure switch preset at 30-50 psi.
Unpacking
Open carton and remove pump. Check
for loose, missing, or damaged parts.
See Parts List.
E
N
G
L
I
S
H
Printed in U.S.A.
08210
0201/009/VCPVP
3P683D 1/3 9.4/4.7 115/230 1 60 3450 *230V 30-50 PSI 1
1
/
4
” 3/4” 8.5” 10” 17.25” 25
3P684D 1/2 8.8/4.4 115/230 1 60 3450 *230V 30-50 1
1
/
4
3/4 8.5 10 17.25 25
2P899A 3/4 12.2/6.1 115/230 1 60 3450 *230V 30-50 1
1
/
4
3/4 8.5 10 19.75 30
3P715B 1/2 8.8/4.4 115/230 1 60 3450 *230V 30-50 1
1
/
4
3/4 24.38 12.25 19.63 —
(*) Easily reconnected to 115V operation.
Specifications
Motor Motor Press. Inches N.P.T.
Max Load Conn. Switch Suc. Dis.
Dimensions
Model HP Amps Volts PH HZ RPM for Sett. Inlt Out H W L Wt
E85176
Jet Pumps Only
To Next Page
Need help?
General
