Safety Warning Labels & Product Specifications
Important: Please review all labels and supporting materials before using your inversion table.
This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
Assembled Non-Use Dimensions: 58.0 (L) x 28.8 (W) x 60.5 in (H) (147.3 x 73.2 x 153.7 cm)
Maximum In-Use Dimensions: 81.0 (L) x 28.8 (W) x 86.5 in (H) (205.7 x 73.2 x 219.7 cm)
Storage Dimensions: 20.0 (L) x 28.8 (W) x 66.0 in (H) (50.8 x 73.2 x 167.6 cm)
Weight
(approx.): X1: 59.3 lb (26.9 kg)
X2: 64.4 lb (29.2 kg)
X3: 65.8 lb (29.8 kg)
28.8 in (73.2 cm)
60.5 in (153.7 cm)
58.0 in (147.3 cm)
The X1 is shown here.
Your actual model may vary.
4
To Next Page
Loading...
