EasyManua.ls Logo

Teeter FitSpine - Safety Warning Labels; & Pr Oduct S Pec I F I Cat I O N S

Teeter FitSpine
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important: Please review all labels and supporting materials before use.
This drawing indicates the locations of the warning labels found on your product. If a label is missing,
illegible or is removed, contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
SAFETY WARNING LABELS
& PRODUCT SPECIFICATIONS
Product Dimensions: 41.6 in (L) x 15.8 in (W) (105.6 x 40.0 cm)
Weight
(approx.): 2.3 lb (1.0 kg)
15.8 in (40.0 cm)
41.6 in (105.6 cm)
SERIOUS INJURY OR DEATH MAY OCCUR
TO REDUCE THIS RISK:
Read and follow all instructions.
BE CERTAIN power cord is routed away from the
inversion table pivot points. DO NOT use if cord or
plug are damaged.
DO NOT use wet or place damp towels on the pad.
DO NOT use pins or metallic fasteners.
DO NOT remove cover.
DO NOT use for over 20 continuous minutes.
DO NOT operate under a blanket or pillow -
excessive heating can occur possibly leading to
fire, electric shock or personal injury.
Individuals with pacemakers or circulatory
conditions should consult a physician before use.
Use on inversion table will affect the balance
causing the table to rotate faster. Adjust table
pivot settings according to the Owners Manual.
!
WARNING
3

Related product manuals