FIGURE 4
USER GUIDE
Figure 7: The cushion is best suited for use at
lower angles of inversion. Set your Angle Tether
at 60 degrees or less for the most benefits.
60 Degrees Max
Figure 8: The cushion is not intended for use
during full inversion (90 degrees) because the
body moves away from the table bed and can
make returning upright more difficult due to the
added weight of the cushion.
Figure 7
Figure 8
6
ALWAYS read, understand, and follow the instructions and warnings associated with and accompanying any
supplementary equipment, such as the Teeter Inversion Table. ALWAYS use a spotter when first attempting
inversion with the FitSpine Heat & Vibration Comfort Cushion as the added weight of the cushion may affect the
balance, causing the table to rotate faster. Adjust your user settings per the Inversion Table Owner’s Manual.
WARNING
!
INVERTING WITH CUSHION
To Next Page
Loading...
